ML 310 - Technical Information

Features:

The ML 310 has an automatic interlocking of combs when the trunnion arms are opened, no flexible hoses (all pipes are zinc-plated steel), no exposed cylinder rods which could be damaged or ingest dirt.  Damage in the event of a collision, is normally limited to inexpensive components because of this models simple design. Maintenance can be done by normal workshop personnel without any special training.

Dimensions:

The mounting space on the vehicle body must provide the following dimensions conforming to DIN 30731 (see figure above): Width = 1492 + 2mm Aperture width = 1400 mm minimum

The given minimum dimensions regarding the safety clearances of the lifter must be respected (see figure above).

Specifications:

 DIN/MGB BIN SIZES:

60 to 360 litre on SPLIT COMBS

500 to 110 litre on COMBINED COMBS

 CYCLE TIME:

8 seconds minimum on SPLIT COMBS

15 seconds minimum on COMBINED COMBS

 TIPPING ANGLE:

55 degrees

 LIFTING CAPACITY:

700  kg (at 150 bar setting)

HYDRAULIC PRESSURE:

180 bar SUPPLY PUMP CAPACITY

(lower pressures and loads adustable)

 HYDRAULIC FLOW:

28 litre per minute for 8 seconds cycle time

Optional extras:

All information given here is subject to change without notice.  Certified specifications will be provided on request.