|
|
|
Lifters & Handling Equipm. - how to select the right one::
Misc. - add your own sub-topics as you wish:
Proposed Purchase Specification:
(This specification will be severely edited from time to time..........)
The installed lifter, when in the parked position, shall not reduce the REL truck's departure angle subtended by the underside of the compactor hopper to the rearmost wheels. (Measured with an unladen vehicle)
The very lowest point of the lifter, when the lifter is fully down onto its mechanical stops, shall not be less than 450mm from the ground. (Measured with an unladen vehicle on level ground)
The mass of the installed lifter, with all ancilliary parts to render it fully functional, shall be less than ....kg.
The hydraulic pressure required to raise the tailgate, with lifters and ancilliaries fitted, shall be less than ....% of the set operating pressure.
No part of the lifter, in its parked position, shall:
- extend more than .....mm rearwards of the compactor tailgate, or
- extend more than .....mm rearwards of rearmost axle, or
- extend more ...% of wheelbase rearwards of the rearmost axle.
|
